|
| |
|
|
Dynamic characteristics drive with frequency inverter
Loveček, Vladimír ; Marada, Tomáš (referee) ; Voldán, Jiří (advisor)
This bachelor thesis deals with a proposal of measurement equipment and software equipment for evaluation of the dynamic characteristics of the drive controlled by frequency inverter, and with subsequent measurement and evaluation. Torque measurements are made using the incremental encoder and evaluated on the basis of mechanical characteristics by development environment MATLAB.
|
|
|
The dynamic characteristics of check valve
Pavlík, Václav ; Dokoupil, Pavel (referee) ; Habán, Vladimír (advisor)
This master´s thesis provides an overview of all designs of check valves, their usage and typical features. Main purpose of this work is to clear up the phenomenon of check valve slam and the other problems that occur during transients. The check valve slam was measured at the test rig in the hydraulic laboratory. For unsteady flow evaluation after pump shut down was used Gibson method. The dynamic characteristic was possible to create by results from this method. It was achieved without impact of the speed of sound in the fluid. This work also contains 2D transient CFD calculations, which was used for evaluation of the hydrodynamic torque acting on the hinge pin. This approach provides an option to calculate wide range of cases at the expense of not entirely exact geometry. The main contribution of the theoretical study at the beginning of this thesis is its entireness. It might give an important clue when right valve is selecting. For good choice of valve might be helpful to use dynamic characteristics in this thesis presented. Mentioned characteristics were created by new way and its background is in measurements and simplified CFD calculations.
|
|
| |
|
|
Transition of cavitating flow to supercavitation
Chovanec, Radomír ; Fic, Miloslav (referee) ; Rudolf, Pavel (advisor)
Bachelor thesis consists of two parts. The first part is dedicated to research. It deals with clarifying the basic concepts of cavitation and current knowledge in the field of supercavitation. The second, experimental part is devoted to flow in Venturi nozzle in the transition from developed cavitation to supercavitation. The aim was to examine the hysteresis that occurs with a change of transition direction. To clarify the phenomenon were compared static and dynamic characteristics acquired from the measurement and visualization on the hydraulic circuit with cavitation jet.
|
|
|
Transition of cavitating flow to supercavitation
Chovanec, Radomír ; Fic, Miloslav (referee) ; Rudolf, Pavel (advisor)
Bachelor thesis consists of two parts. The first part is dedicated to research. It deals with clarifying the basic concepts of cavitation and current knowledge in the field of supercavitation. The second, experimental part is devoted to flow in Venturi nozzle in the transition from developed cavitation to supercavitation. The aim was to examine the hysteresis that occurs with a change of transition direction. To clarify the phenomenon were compared static and dynamic characteristics acquired from the measurement and visualization on the hydraulic circuit with cavitation jet.
|
|
|
The dynamic characteristics of check valve
Pavlík, Václav ; Dokoupil, Pavel (referee) ; Habán, Vladimír (advisor)
This master´s thesis provides an overview of all designs of check valves, their usage and typical features. Main purpose of this work is to clear up the phenomenon of check valve slam and the other problems that occur during transients. The check valve slam was measured at the test rig in the hydraulic laboratory. For unsteady flow evaluation after pump shut down was used Gibson method. The dynamic characteristic was possible to create by results from this method. It was achieved without impact of the speed of sound in the fluid. This work also contains 2D transient CFD calculations, which was used for evaluation of the hydrodynamic torque acting on the hinge pin. This approach provides an option to calculate wide range of cases at the expense of not entirely exact geometry. The main contribution of the theoretical study at the beginning of this thesis is its entireness. It might give an important clue when right valve is selecting. For good choice of valve might be helpful to use dynamic characteristics in this thesis presented. Mentioned characteristics were created by new way and its background is in measurements and simplified CFD calculations.
|
|
| |
|
| |
|
|
Dynamic characteristics drive with frequency inverter
Loveček, Vladimír ; Marada, Tomáš (referee) ; Voldán, Jiří (advisor)
This bachelor thesis deals with a proposal of measurement equipment and software equipment for evaluation of the dynamic characteristics of the drive controlled by frequency inverter, and with subsequent measurement and evaluation. Torque measurements are made using the incremental encoder and evaluated on the basis of mechanical characteristics by development environment MATLAB.
|
guest ::
